Mode: Standard Install
of 4: Deployment
Backup Existing Files
Remove Existing Files
Backup Existing Files
Remove Existing Files
Backup Existing Database
Database Only Install
Backup Existing Database
Leipert Financial Group
- no notes -
Archive File Not Found!
The installer file and the archive are bound together as a package when the archive is built. They must be downloaded together and used together at install time. The archive file name should
be changed when it is downloaded because the file name is strongly bound to the installer. When downloading the package files make sure both files are from the same package line in the packages view within the Duplicator WordPress admin.
The full archive file name must be
the same as when it was built (character for character), or the installer will not work properly. To find out the exact archive name that is bound to this installer open the dup_installer/dup-archive_[HASH].txt file with a text editor and search for the text "package_name":"[HASH]_archive.zip/daf". Check to see what that value is assigned to and that should be the name of the archive file placed in the same path as this installer.
If the contents of the archive were manually transferred to this location without the archive file then simply create a temp file named the same archive bound to this installer and place the file in the same directory as the installer.php file. The temp file will not need to contain any data. Afterward, refresh this page and continue with the install process.
The system validation checks help to make sure the system is ready for install.
PHP Safe Mode:
The deployment path must be writable by PHP in order to extract the archive file. Incorrect permissions and extension such as
can sometimes interfere with PHP being able to write/extract files. Please see the
help link for complete details. PHP with
should be disabled. If Safe Mode is enabled then please contact your hosting provider or server administrator to disable PHP safe mode.
Support for the PHP
is required. Please contact your hosting provider or server administrator to enable the mysqli extension.
The detection for this call uses the function_exists('mysqli_connect') call.
This server is running PHP:
A minimum of PHP 5.2.17 is required
. Contact your hosting provider or server administrator and let them know you would like to upgrade your PHP version.
Duplicator works best by placing the installer and archive files into an empty directory. If a wp-config.php file is found in the extraction directory it might indicate that a pre-existing WordPress site exists which can lead to a bad install.
If the archive was already manually extracted then
[Enable Manual Archive Extraction]
Empty the directory of all files, except for the installer.php and archive.zip/daf files.
Advanced Users: Can attempt to manually remove the wp-config file only if the archive was manually extracted.
This package is 231 day(s) old. Packages older than 180 days might be considered stale. It is recommended to build a new package unless your aware of the content and its data. This is message is simply a recommendation.
PHP Version 5.2
This server is currently running PHP version [7.2.27]
Duplicator allows PHP 5.2 to be used during install but does not officially support it. If you're using PHP 5.2 we strongly recommend NOT using it and having your host upgrade to a newer more stable, secure and widely supported version. The
end of life for PHP 5.2
was in January of 2011 and is not recommended for use.
Many plugin and theme authors are no longer supporting PHP 5.2 and trying to use it can result in site wide problems and compatibility warnings and errors. Please note if you continue with the install using PHP 5.2 the Duplicator support team will not be able to help with issues or troubleshoot your site. If your server is running
please feel free to reach out for help if you run into issues with your migration/install.
PHP Version Mismatch
You are migrating site from the PHP 5.6.40 to the PHP 7.2.27
If this servers PHP version is different to the PHP version of your package was created it might cause problems with proper functioning of your website and/or plugins and themes. It is highly recommended to try and use the same version of PHP if you are able to do so.
PHP Open Base
is enabled and your having issues getting your site to install properly; please work with your host and follow these steps to prevent issues:
Disable the open_basedir setting in the php.ini file
If the host will not disable, then add the path below to the open_basedir setting in the php.ini
Save the settings and restart the web server
Note: This warning will still show if you choose option #2 and open_basedir is enabled, but should allow the installer to run properly. Please work with your hosting provider or server administrator to set this up correctly.
(detection limit is set at 300MB)
(zero means not limit)
setting is used to determine how long a PHP process is allowed to run. If the setting is too small and the archive file size is too large then PHP may not have enough time to finish running before the process is killed causing a timeout.
Duplicator attempts to turn off the timeout by using the
setting. If this notice shows as a warning then it is still safe to continue with the install. However, if a timeout occurs then you will need to consider working with the max_execution_time setting or extracting the archive file using the 'Manual Archive Extraction' method. Please see the
help link for more details.
This archive is not a multisite
Duplicator does not support WordPress multisite migrations. We recommend using Duplicator Pro which currently supports full multisite migrations and subsite to standalone site migrations.
While it is not recommended you can still continue with the build of this package. Please note that after the install the site may not be working correctly. Additional manual custom configurations will need to be made to finalize this multisite migration.
[upgrade to pro]
WordPress wp-config Location
If the wp-config.php file was moved up one level and out of the WordPress root folder in the package creation site then this test will show a warning.
This Duplicator installer will place this wp-config.php file in the WordPress setup root folder of this installation site to help stabilize the install process. This process will not break anything in your installation site, but the details are here for your information.
WordPress wp-content Location
If the wp-content directory was moved and not located at the WordPress root folder in the package creation site then this test will show a warning.
Duplicator Installer will place this wp-content directory in the WordPress setup root folder of this installation site. It will not break anything in your installation site. It is just for your information.
Sufficient disk space
You have sufficient disk space in your machine to extract the archive.
Manual Archive Extraction
Shell Exec Unzip
Create New (recommended)
Controls how .htaccess, .user.ini and web.config are used.
These options are not applied until step 3 is ran.
[Quick Database Connection Test]
TERMS & NOTICES
The Duplicator software and installer should be used at your own risk. Users should always back up or have backups of your database and files before running this installer. If you're not sure about how to use this tool then please enlist the guidance of a technical professional.
test this installer in a sandbox environment before trying to deploy into a production environment. Be sure that if anything happens during the install that you have a backup recovery plan in place. By accepting this agreement the users of this software do not hold liable Snapcreek LLC or any of its affiliates liable for any issues that might occur during use of this software.
Do not connect to an existing database unless you are 100% sure you want to remove all of it's data. Connecting to a database that already exists will permanently DELETE all data in that database. This tool is designed to populate and fill a database with NEW data from a duplicated database using the SQL script in the package name above.
Only the archive and installer file should be in the install directory, unless you have manually extracted the package and selected the 'Manual Archive Extraction' option under options. All other files will be OVERWRITTEN during install. Make sure you have full backups of all your databases and files before continuing with an installation. Manual extraction requires that all contents in the package are extracted to the same directory as the installer file. Manual extraction is only needed when your server does not support the ZipArchive extension. Please see the online help for more details.
When you are done with the installation you must remove these files/directories:
These files contain sensitive information and should not remain on a production system for system integrity and security protection.
Duplicator is licensed under the GPL v3 https://www.gnu.org/licenses/gpl-3.0.en.html including the following disclaimers and limitation of liability.
Disclaimer of Warranty
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
Limitation of Liability
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
I have read and accept all
terms & notices
(required to continue)
This installation will not be able to proceed until the archive and validation sections both pass. Please adjust your servers settings or contact your server administrator, hosting provider or visit the resources below for additional help.
of 4: Extraction
Step 1 - AJAX Response
Extracting Archive Files
Keep this window open during the extraction process.
This can take several minutes.
Please try again an issue has occurred.
An unknown issue has occurred with the file and database setup process. Please see the
file for more details.
« Try Again
See online help for more details at
PHP INI Path:
PHP ZIP Archive:
Error Log Path:
PACKAGE BUILD DETAILS